免费a级毛片出奶水,一本一道波多野结衣AV中文,熟女少妇精品一区二区 ,丰满人妻熟妇乱又伦精品

歡迎進入深圳市錦鴻宇實業有限公司官網!
News
NewsNews

What are the processes of sheet metal shell processing?

時間:2023-08-03瀏覽次數:4071

With the increasing use of sheet metal shells, its processing technology has also attracted much attention. A sheet metal shell is a thin-plate hardware, that is, a part that can be processed by stamping, bending, stretching, etc., a rough definition is a part with a constant thickness during the processing process. The corresponding is castings, forgings , Machining parts, etc. So what are the sheet metal shell processing technology? Next, Jin Hongyu editor will introduce to you.


1. Cutting


There are five main cutting methods: shearing machine, punching machine, CNC cutting, laser cutting, sawing machine, etc.


1. The shearing machine is mainly used to prepare mold blanking and forming processing. The cost is low, and the general accuracy is less than 0.2, but it can only process strips or blocks with no holes and no corners.


2. Punching machine punches the unfolded flat parts into various shapes of materials. It has the characteristics of short time-consuming, high efficiency, high precision, low cost, suitable for mass consumption, and designable molds.


3. Ordinary punch processing includes punching, corner cutting, blanking, punching convex hull (bump), punching and tearing, punching, forming, etc. The processing process requires corresponding molds to complete.


4. The NC machining program must be written first, and the programming software is used to write the unfolding program that can be recognized by the NC number-drawing machine, so that it can stop punching the flat sheet of various configurations according to these programs step by step. , Its structure adopts cutting method, the cost is low, and the accuracy can reach 0.15.


5. Laser cutting is a laser cutting method. The structure of the flat plate is cut out on a large flat plate. Just like NC cutting, a laser program needs to be written. It can cut out a variety of flat parts with complex shapes. It is expensive and accurate. Is 0.1. The sawing machine is mainly used for materials such as aluminum profiles, square tubes, round bars, etc., with low cost and high processing accuracy.




Two, fitter


The fixture is mainly used for countersinking, tapping, reaming, drilling, etc. in sheet shell processing. The buried hole angle is generally 120°C for pulling rivets, 90°C for countersunk screws, and inch bottom holes for tapping.


Three, flanging


That is, the hole extraction in the flanging processing of the sheet shell is to draw a larger hole to a smaller base hole, and then tap it to increase its strength and the number of threaded rings to prevent slippage. It is suitable for The thickness of the plate is thin, and the hole circumference is normally shallow flanging, and the thickness does not change at all.


Four, pressure riveting


It is completed by hydraulic riveting machine or punching machine, riveted to the hardware to form a detachable or non-detachable joint body, as well as the rising riveting method, and the direction needs to be paid attention to.


Five, bending


Plate and shell bending is to fold the 2D plane plate into a 3D shape part. Its processing requirements include a bending machine and a corresponding bending die. The bending die has a certain bending order to form an intervening back bending. Normally press riveting first and then bend, but there are materials that will interfere with riveting after riveting. There is also a process that requires folding riveting—pressing riveting—and then folding riveting.


Six, welding


There are many processing and welding methods for metal sheet shells, but CO2 welding and argon arc welding are commonly used. CO2 welding has the advantages of high consumption efficiency, low energy consumption, low cost, and good rust resistance. It is used for welding stainless steel and aluminum plates. Deep melting, slow melting, low efficiency and high production cost.

服務熱線:13631565136
手機:18926579610
電話:0755-26740010
郵箱:senyuanmoju@126.com
地址:廣東省深圳市寶安區石巖街道水田工業區寶石東路123號7棟1樓

掃一掃關注我們

亚洲无码在线播放| 精品国产一区二区三区四区vr| 老师课后辅导乳揉搓h在线观看| 东北妇女精品bbwbbw| 国精产品一区一区三区糖心| 国产真人无码作爱免费视频久| 国产精品久久欧美久久一区| 日本免费无码一区二区到五区| 99精品久久精品一区二区| 青草国产精品久久久久久| 欧美性69式xxxx护士| 欧美18videosex极品| 久久久精品人妻一区二区三区| 色婷婷丁香五月久久综合| 亚洲精品国产摄像头| 精品久久久久久久免费人妻 | 国产精品多P对白交换绿帽| 99久久国产露脸国语对白| 无码国精品一区二区免费| 久久人做人爽一区二区三区| 日日噜噜夜夜狠狠久久AV| 欧美精品18VIDEOS性欧美| 人妻丰满熟妇av无码区app| 国产精品一区二区久久不卡| 国产精品一区二区AV不卡| 国产精品久久久久久婷婷| 免费xxxx大片| 偷玩朋友熟睡人妻| 99偷拍视频精品一区二区| 国产成人无码AV片在线观看| 亚洲精品无码永久在线观看男男 | 日本黄a级a片国产免费| 4438XX亚洲最大五色丁香 | 国产乱妇乱子在线播视频播放网站| 成人h无码日本动漫在线观看| 丰满熟妇乱又伦精品| 国产精品无码一区二区在线看| 久久亚洲av成人无码国产电影| 麻豆一区二区99久久久久| 国产精品一区二区 尿失禁| 国产欧美在线观看不卡|